EDCO 10" Turbo Grinder

10" Turbo Grinder

10" Turbo Grinder \| 7" Turbo Edge Grinder

Features

The TG-10 is four times faster than conventional grinders.

10" Working width will grind approximately 400-500 sq. ft. per hour at 1/16" with an EDCO Diamond Disc
Grind wet or dry
Includes 10" Diamond Disc & standard vacuum port
Rounded shroud allows you to grind within 1/2” of any vertical surface and also provides better dust control
Less torque on operator
Tapered roller bearings have improved seals for longer life and less maintenance

GRIND LEVEL WITH EDCO'S NEW STANDARD LEVELING KIT!!

Adjust your grinder disc or multi-accessory plate with the rear wheel mounted level kit
Easy access turn style knob
Install different height diamond accessories and level them to ensure maximum productivity
A properly leveled disc or accessory wears evenly, lasts longer and provides a better floor finish
This EDCO exclusive feature is standard on all new machines
A retrofit kit is available to upgrade previously delivered grinders

RIGID HEAD ASSEMBLY IS IDEAL FOR:

Grinding uneven expansion joints, high spots, joint curls and bridge decks
Removing coatings
Grinding rough concrete surfaces

FLEX HEAD ASSEMBLY IS IDEAL FOR:

Preparing a smooth, flat floor to receive a new coating
Removing coatings
Grinding rough concrete surfaces
Grinding surfaces 4 times faster than a traditional floor grinder

Model	Part #	Power	Horse Power	Phase	Amps	* RPM's	Belts	Length	Width	Height	Weight
TG-10, 11H	56600	Gasoline	**11 HP	NA	NA	2520	Std. "V" Belts	43"	21"	37"	180 lbs.
TG-10, 5	56900	Electric	5 HP 230 V	Single	19.5	2275	Std. "V" Belts	43"	21"	37"	208 lbs.
TG-10, 5	56800	Electric	5 HP 230/460 V	Three	12/6	2275	Std. "V" Belts	43"	21"	37"	208 lbs.
TG-10, 11P	56700	Propane	13 HP 115 V Starter	NA	NA	2520	Std. "V" Belts	43"	21"	37"	254 lbs.

*RPM's are based on the machine's accessory speed.
** As rated by the engine manufacturer. The power rating of the engine indicated on this site is the net power output tested on a production engine for the engine model and measured in accordance with SAE j1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.

Product Manuals & Literature

Only the most recently updated product information is available on this website. Call 1-800-638-3326 with the Serial# and Model# for manuals
and parts list of older product models.

Additional Videos

Accessories