EDCO 10" Scarifier

10" Walk Behind Scarifier

8" Scari-Lite Mini-Planer \| 8" Walk Behind Scarifier \| 10" Walk Behind Scarifier

Features

10" working width will scarify approximately 500-700 sq. ft. per hour at Depth Per Pass of 1/8"
1/4” steel frame
Heavy-duty, oversized bearings
Weighs 299 lbs. with cutters
Teathered emergency stop switch
Larger 6” wheels in the rear for easy handling
Gasoline or Electric models available
Vacuum port standard for dust-free cuting
6-Shaft and 8-Shaft easy change, side loading drums available
Tungsten carbide or steel cutters available

Ideal For:

Aggressive removal of material
Production scarification
Heavy coatings removal

Model	Part #	Power	Horse Power	Phase	Amps	* RPM's	Belts	Length	Width	Height	Weight
CPM-10-7.5B	69200	Electric	7.5 HP 230/460 V	Three	17.4/8.7	2344	Cgd. "V" Belts	41"	23"	41"	287 lbs.
CPM-10-13H	69100	Gasoline	**13 HP	NA	NA	2446	Cgd. "V" Belts	41"	23"	41"	267 lbs.

*RPM's are based on the machine's accessory speed.
** As rated by the engine manufacturer. The power rating of the engine indicated on this site is the net power output tested on a production engine for the engine model and measured in accordance with SAE j1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.

Product Manuals & Literature

Cutter Drum Assembly Instructions

Only the most recently updated product information is available on this website. Call 1-800-638-3326 with the Serial# and Model# for manuals
and parts list of older product models.

Accessories

Carbide & Steel Cutters