|
|
| Features |
EDCO Grinders - Proven in over 50 years of use. Accept no substitute!
- 22" working width will grind approximately 400-500 sq.ft. per hour at 1/32" with EDCO Dyma-Serts
- Gas, electric & propane power options available
- Includes 2 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories
- 2" Vacuum port and water port
- Counter-rotating discs prevent machine from pulling side to side and give operator greater control
- 6 grinding accessories required per loading
Ideal for:
- Production grinding and floor cleaning on large or small surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas
- Light grinding or cleaning of concrete surfaces
- Leveling uneven joints
- Removing mastics, thin-set, high spots, epoxies and urethanes
- Lightly texturing slippery concrete surfaces
|
|
|
| Model |
Part # |
Power |
Horse Power |
Phase |
Amps |
* RPM's |
Belts |
Length |
Width |
Height |
Weight |
| 2EC-1.5B |
50100 |
Electric |
1.5 HP, 115/230 V |
Single |
19/9.5 |
231 |
Std. "V" Belts |
47" |
27" |
38.5" |
233 lbs. |
| 2EC-2B |
51300 |
Electric |
2 HP, 230 V |
Single (50Hz) |
10 |
190 |
Std. "V" Belts |
47" |
27" |
38.5" |
237 lbs. |
| 2EC-3B |
50800 |
Electric |
3 HP, 230 V |
Single |
14 |
231 |
Std. "V" Belts |
47" |
27" |
38.5" |
261 lbs. |
| 2GC-5.5H |
51800 |
Gasoline |
**5.5 HP |
NA |
NA |
562 |
Std. "V" Belts |
47" |
27" |
38.5" |
197 lbs. |
| 2GC-11H |
51400 |
Gasoline |
**11 HP |
NA |
NA |
562 |
Std. "V" Belts |
47" |
27" |
38.5" |
242 lbs. |
| 2GC-13P |
54800 |
Propane |
13 HP, 115 V Starter |
NA |
NA |
562 |
Std. "V" Belts |
47" |
27" |
38.5" |
298 lbs. |
*RPM's are based on the machine's accessory speed.
** As rated by the engine manufacturer. The power rating of the engine indicated on this site is the net power output tested on a production engine for the engine model and measured in accordance with SAE j1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. |
| Product Manuals & Literature |
|
Only the most recently updated product information is available on this website.
Call 1-800-638-3326 with the Serial# and Model# for manuals
and parts list of older product models. |
| Addtional Videos |
| |
| Accessories |
| |
|
|
|
|
|
|
|
