Moving a trowel
The blades on a trowel spin in a clockwise direction. All EDCO trowels are directed left or right by applying a slight upward (lifting) or downward (lowering) pressure on the handle. Upward pressure will put more pressure on the blade furthest from you and that will push the trowel to the left. Downward pressure will put more pressure on the blade closest to you and that will push the trowel to the right. Similiar techniques will move the trowel forwards and backwards. After a little practice, a novice can easily operate an EDCO trowel.
Adjusting the blade angle
Rotate the blade adjustment knob (located on the top end of the trowel handle) clockwise to tilt the blades and counterclockwise to flatten the angle of the blade. Blade adjustment is based on the desired performance for the specific job application. For example, the degree of the blade angle for a float blade will be flat and when finishing concrete, the angle is usually about 3 to 5 degrees.
Clean off the trowel after use
Clean the entire trowel, blades and adapter thoroughly after use. The blades can usually be cleaned with a high pressure hose and water while the concrete is still wet. |
