EDCO Power Trowel Accessories

Power Trowel Accessories

Enlarge Image	Float Blades Float Blades are made from an abrasive resistant steel. This is a wide blade, with all edges turned up. This blade is used flat. To use float blades, a finisher will wait only until the concrete is hard enough to support his weight. The blades are used in a flat positoin and their function is to pack the surface aggregate into the slab and force the water to the top. These blades can be reversed.
Enlarge Image	Finish Blades Finish Blades are made of a quality spring steel. These are narrow, 6 inch wide blades. The length varies according to the diameter of the machine on which they are to be used. All finish blades are reversible (can be turned end for end). This blade is used when the concrete has begun to set. The blades are tilted from 3 degrees to 5 degrees and usually used at full speed. They make the concrete surface hard and glossy.
Enlarge Image	Combination Blades Combination Blades will do both floating and finishing operations. This blade is not reversible. The combination blade has three (3) edges turned which allows it to be used flat in the floating position and tilted in the finish position.
Enlarge Image	Stainless Steel Blades High-quality non-streaking stainless steel blades.
Enlarge Image	Plastic Blades High grade insudstrial polymer used typically for the application of specialty coatings. Plastic blades will not burnish or mark the surface. Only available in combination style.

Enlarge Image

Epoxy Screed Box
The easy-roll EDCO Screed Box makes it simple to apply epoxy mortas quickly and uniformly. Available in 30" and 36" widths to suit your job site conditions.

30" Screed Box - Part# C90300
36" Screed Box - Part# C90400

Enlarge Image

LEV-L-IT
Change the pitch of trowel blades instantly for flatter, smoother floors. Release the handle, and blades return to the previous position so operator can resume troweling without delays.

Part# C84004

Enlarge Image

TOTE-A-TROWEL ACCESSORY
EDCO's exclusive two-wheel dolly snaps into position under all power trowels for easy transport to and from job sites. Ideal for rental yards! Tote-A-Trowel makes moving equipment a one-man job.

Part# 81400

	24" Trowel Blades
Part#	Description
40470	Bolt-On Combo Trowel Blade
40490	Bolt-On Float Trowel Blade
	30" Trowel Blades
40270	Snap-On Combo Trowel Blade
40280	Snap-On Finish Trowel Blade
40290	Snap-On Float Trowel Blade
40270-C	Bolt-On Combo Trowel Blade
40280-C	Bolt-On Finish Trowel Blade
40290-C	Slip-On Float Trowel Blade*
	36" Trowel Blades
40040	Snap-On Combo Trowel Blade
40050	Snap-On Finish Trowel Blade
40060	Snap-On Float Trowel Blade
40040-C	Bolt-On Combo Trowel Blade
40050-C	Bolt-On FInish Trowel Blade
40060-C	SLip-On FLoat Trowel Blade*
	46" Trowel Blades
40070	Snap-On Combo Trowel Blade
40080	Snap-On Finish Trowel Blade
40090	Snap-On Float Trowel Blade
40070-C	Bolt-On FInish Trowel Blade
40080-C	Bolt-On Finish Trowel Blade
40090-C	Slip-On Float Trowel Blade*
	Stainless Steel Trowel Blades
Part#	Description
40220	8" x 11" SS Combo Trowel Blade
40210	8" x 14" SS Combo Trowel Blade
	Plastic Trowel Blades
C84040	8" x 11" Plastic Combo Trowel Blade
C84050	8" x 14" Plastic Combo Trowel Blade