Floor Grinding & Surface Preparation Removal & Demolition Concrete Sawing & Drilling Masonry, Hardscape & Tile Saws Hand-Held Tools Concrete Dust Extraction & Industrial Cleaning Equipment

Floor Grinder Accessories

  español / français

Dyma Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings.

Dyma-Serts grind 5 times faster than grinding stones and last longer - up to 30,000 square feet (2,800 sq. m.) of grinding action on standard 3,500 PSI concrete. Dyma-Serts can be used for wet or dry grinding.

Ideal for:

  • Smoothing rough surfaces or trowel marks
  • Grinding terrazo
  • Repairing surface damage to concrete slabs
  • Removing urethane or epoxy thincoats
  • Grinding sharp aggregates such as flint and granite
  • Removing surface imperfections from epoxy mortars
  • Leveling high spots
  • Removing thin mastics and thin-set
  Scarifier Assemblies

Steel Cutters
Scarifier Assemblies are high carbon steel cutter assemblies in steel cases.

- Standard cutters last 3 to 6 hours
- Heavy-duty cutters last 8 to 12 hours

Ideal for:

  • Breaking up hard surfaced deposits of oil-dri, fiberglass, grout or plaster
  • Removing concrete buildup
  • Leveling brick or wood block floors
  • Initial grinding of rough, broom-finished concrete
  • Preparing surfaces for overlayments
  • Texturing slippery floors
  Wire Brushes
Wire Brushes are flat steel strips mounted in wooden blocks.

Ideal for:

  • Removing deposits of grease, wax, ink or food products
  • Breaking up rubber-backed carpeting
  Silabide Pad
Silibide Pads are ideal for scrubbing:
  • Concrete
  • Stone
  • Metal
  • Brick
  • Wood

Make Quick Work of Epoxy Coatings & Hard Glue. Four times stronger than carbide, with remarkable wear resistance.

Ideal for the removal of: Hard Tacky Surfaces, Urethane Epoxy, Multi-Part Epoxy, Water-Proofing Membrane, Pool Deck Coating, Thick Mastics, Old and New Epoxy Coatings.

  • PCD's Stay Sharp - No need to change
  • High Quality "Mining Grade" Polycrystalline Diamond
  • Creates Grooved Surface
  • Abrasive Resistant
  • Fracture Resistant
Strip-Serts are carbide tipped blocks designed to clean floors without grinding into the concrete.

Strip-Serts have a replaceable, multi-sided tungsten carbide edge that can be rotated for maximum use.

Ideal for:

  • Removing mastics, paints, resins, tar, fiberglass, ice and industrial buildups

Strip-Serts are designed to strip away coatings not to grind concrete. Grinding concrete with Strip Serts will dull the sharp edges quickly causing the grinding action to stop.

  Grinding Stones

Grinding Stones have various grits for course or fine polishing.

Ideal for:

  • Removing trowel marks
  • Removing rain spots
  • Leveling high joints less than 1/16" high
  • Removing excess concrete
  • Smoothing rough finishes
  • Grinding and marble

  Surfacer Disc Assembly
The Surfacer Disc assembly is easily assembled for heavy-duty surface build-up removal. The cutter wheels can be positioned to meet removal needs.

Ideal for:

  • Removal of industrial build-ups, tar, rubber, fiberglass, grout or plaster
  • Roughening concrete
  • Grinding asphalt
Home | Customers | Products | Company Information | Contact Us | Privacy Policy | Site Map | Links
© Copyright 2010. EDCO, Inc.
Powered by Maryland Website Designer WebsiteGrowers.com, Inc.
Home Customers Products Company Information Contact Us EDCO Blog